Thursday 28 February 2013

Payment plan for new A4 die cutting system

After several requests I am pleased to confirm we have set up a payment plan to help anyone thinking if buying the new system . It will work as follows . You may call us at the warehouse to register on 01623 818910 . One you have done that , the girls will take your initial payment for your machine . This must be £25 . You can then top up in instalments of minimum £25 as you go along in the run up to the arrival if the machine mid to late April . We hope this helps some of you out . Gordon
Posted by at

13 comments:

  1. DeBe28 February 2013 at 08:53

    Sounds a great idea, what is the total price and what is the guarantee on the machine please? You did tell me at Stevenage but I cannot remember. It looked excellent though! x

    ReplyDelete
    Replies
    1. Gordon28 February 2013 at 09:54

      The price of the machine is £135 in total .There is no difference if you pay for it this way. Gordon

      Delete
  2. Anonymous28 February 2013 at 09:34

    Can't we just buy a machine when your stock arrives, you can't just be having them made to order?

    ReplyDelete
    Replies
    1. Gordon28 February 2013 at 09:55

      We have 3000 on order , of course you can do this .For some people this is not possible and we have been asked by several people to do this for them. Times are hard . Gordon

      Delete
  3. Pamela28 February 2013 at 09:42

    Great idea Gordon! I'm hanging on to buy the bigger machine later this year. Will you be doing payment plans for this machine?

    ReplyDelete
    Replies
    1. Gordon28 February 2013 at 09:56

      Hi. I will see how this goes first and take it from there . Gordon

      Delete
  4. PaulineC28 February 2013 at 12:11

    If we order it at the NEC in March can we still pay the 50% deposit and then the balance when it arrives? Will there be postal charges on top if we do order it at the NEC? Thanks

    ReplyDelete
    Replies
    1. Gordon28 February 2013 at 14:18

      Yes you can and postage will be FREE . Come along and have a look and try out the machine for yourself.

      Gordon

      Delete
  5. PaulineC1 March 2013 at 09:24

    Thanks Gordon I will try it out at the NEC as you suggest. Could you also tell me if you have any idea if AccuQuilt Go dies will work in your machine? I nearly bought some at a quilting show, but the people selling them said they would not cut in the Sizzix Big Shot.
    I was not sure if that was because they wanted to sell me the special die cutting machine made for the dies.

    ReplyDelete
    Replies
    1. Gordon1 March 2013 at 10:33

      Hi
      If you like , why dont you send me one of these dies to try out for you . I will send it back once we have done so and let you know the results. That also goes for anyont else , if you have something you would like us to try for you , just send it to us .Hope this helps. Gordon

      Delete
  6. PaulineC1 March 2013 at 11:06

    Thanks for the offer Gordon but although I really liked the AccuQuilt dies they were very expensive and I did not buy any just in case they were no good for my machine.

    ReplyDelete
  7. Sam juggins12 March 2013 at 08:48

    Ohhhh now that's tempting, did not know you would have this at the NEC.

    ReplyDelete
    Replies
    1. Gordon12 March 2013 at 13:54

      Hi
      Yes , we have taken a small stand just as you walk in the entrance , we are next to Pinflair.
      Look forward to seeing you there .
      Gordon

      Delete

Subscribe to: Post Comments (Atom)